Triton RL5000, Руководство по обслуживанию

Страница: 128 / 173

111
S
ECTION
3 - L
EVEL
II M
ODULE
R
EPLACEMENT
/ D
IAGNOSTIC
S
TATUS AND
T
ESTING
Section 3
R
EPLACING THE
SDD D
ISPENSING
M
ECH A NISM
Tools:
1 - #2 Phillips Screwdriver
The SDD dispensing mechanism is lo cat ed in the se cu ri ty cab i net of the ATM.
R
EMOVING THE
SDD D
ISPENSING
M
ECH A NISM
1. "Shutdown the Terminal" from Management Functions.
2. Unlock and open the control pan el.
3. Push the AC pow er ON/OFF switch to the OFF(0) position.
4. Unlock and open the cabinet door fascia to ac cess the com bi na tion lock.
5. Open the security cabinet main door by en ter ing the cor rect com bi na tion and
releasing the lock mech a nism.
6. Remove the cassette from the dis pens ing mech a nism.
7. Retractable Mounting Trays ONLY (otherwise, go to step 8): Refer to Figure
3-99. Pull the dispenser mounting tray to its ex tend ed po si tion.
8. Refer to Figure 3-99. Loosen the two (2) wing nuts that se cure the front of
dispensing mech a nism to the mounting tray.
9. Grasp the dispensing mech a nism as shown in Figure 3-100 and pull it up to
re lease it from the threaded wing nut studs lo cat ed at the front left and right
corners the mount ing tray. Pull the dispenser for ward just far enough to gain
ac cess to the rear of the dispenser.
Figure 3-99. Loosen the wing nuts
to release the dispenser.
Figure 3-100. Removing the
dispensing mechanism