Triton RL5000, Руководство по обслуживанию

Страница: 138 / 173

121
S
ECTION
3 - L
EVEL
II M
ODULE
R
EPLACEMENT
/ D
IAGNOSTIC
S
TATUS AND
T
ESTING
Section 3
Error Code Description Occurrence Explanation
49* Jam at exit During Dispense,
Purge or Diagnostics
A note has been pulled
into the exit during
reverse transport
running and cannot be
driven out again.
50 Interference
recovery
During any operation The operation of the
microprocessor was
interrupted, but
successful recovery
51 Suspect exit
accountancy
During dispense or
diagnostics
The SDD cannot
guarantee the exit
count.
52** RAM error After power up The SDD has identifi ed
an error in its ‘random
access memory’. No
operation is permitted.
53 EPROM error After power up The SDD has identifi ed
an error in its program
memory. No operation
is permitted.
54 Operation
timeout
During dispense or
diagnostics
The current operation
has exceeded the two
minute timeout period
and has been termi-
nated.
55 RAM
corruption
During Dispense,
Purge or Diagnostics
The internal counters
are corrupted. The
operation is terminated.
The exit count cannot
be guaranteed.
56 Link error During dispense or
diagnostics
The option links (LK5)
have changed since
power up. No operation
is permitted.
128 - 131 No or Incorrect
response from the
dispenser
During Dispense,
Purge or Diagnostics
No operation permitted
133 5v not present
from the dispenser
on carrier detect
During Dispense,
Purge or Diagnostics
No operation permitted
135 Feed sensor
blocked
During Dispense,
Purge or Diagnostics
Feed sensor covered.
Note: Error codes marked * may have notes left in the transport when reported. The
SDD will automatically purge the transport before commencing the next operation.