6 Mechanical Installation
6.1 Safety Instructions
Symbol
Safety Information
CAUTION
- There is a danger of electrical shock by high EMC level which could result in injury, if the
servo amplifier (or the motor) isn't properly EMC-grounded.
- During installation work strictly avoid that drill chips, screws or other foreign substances
drop into any device. Strictly prevent the devices from moisture.
- Protect the servo amplifier from impermissible stresses. In particular, do not let any compo-
nents become bent or any insulation distances altered during transport and handling. Avoid
contact with electronic components and contacts.
CAUTION
- The device heats up during operation and the temperature on the heat sink may reach high
temperatures. Please bear this in mind for adjacent components.
- Cooling air must be able to flow through the devices without restriction. For installation in
control cabinets with convection, always fit an internal air circulation fan.
- The servo drive will switch-off itself in case of overheating. Ensure that there is an adequate
cooling in the control cabinet.
CAUTION
- Protect the servo amplifier from impermissible stresses. In particular, do not let any compo-
nents become bent or any insulation distances altered during transport and handling. Avoid
contact with electronic components and contacts.
NOTICE
Don't mount devices, which produce magnetic fields, directly beside the servo drive. Strong
magnetic fields could directly affect internal components. Install devices which produce mag-
netic field with distance to the servo drive and/or shield the magnetic fields.
Further information and instructions can be found in Table 14: Ambient conditions.
HWTSD80-TSD130_4_HardwareManual_EP006
2022-01-27
23/49
