4 Handling
4.1 Nameplate
The nameplate depicted below is attached to the side of the servo drive.
Figure 3: Nameplate of the TSD series drives.
4.2 Transport
During transport, the drive must remain inside its original packaging which complies with the ESD
standard.
The transport conditions must respect the IEC 61800-1 standard.
Transport by qualified personnel only.
Avoid shocks while transporting.
The servo drives contain electrostatic sensitive components, that can be damaged by incorrect han-
dling. Discharge yourself before touching the servo drive. Avoid contact with highly insulating mate-
rials, such as artificial fabrics and plastic films. Place the servo drive on a conductive surface.
If the packaging is damaged, check the unit for visible damage. In such an event, inform the shipper
and the manufacturer.
TSD80/TSD130
Temperature
-25°C (-13°F) and +70°C (+158+C), max. rate of change 20K / hour
Humidity
less than 95% at max +40°C without condensation
Shock limit
Dropping height of packed device max. 0.25m
Frequency
Amplitude
Acceleration
Vibration limit
2Hz ≤ f < 9Hz
3.5mm
not applicable
9Hz ≤ f < 200Hz
not applicable
10m/s²
200Hz ≤ f < 500Hz
Not applicable
15m/s²
Table 6: Climatic and mechanical conditions during Transport.
HWTSD80-TSD130_4_HardwareManual_EP006
2022-01-27
11/49
Drive
Hardware Type
Electrical
Supply
Output Voltage
and Current
max. ambient
Temperature
Serial Number
Hardware
Revision
Enclosure
Rating
