manualshive.com logo in svg

TRENDnet TWG-BRF114, Руководство пользователя, Страница: 8 / 88

Поделиться
Скачать
TRENDnet TWG-BRF114 Скачать руководство пользователя страница 8

Broadband Router User Guide 

6 

Rear Panel 

 

2 

Figure 3: Rear Panel 

Reset Button 

This button has two (2) functions: 

•

 

Reboot

.  When pressed and released, the Broadband Router 

will reboot (restart). 

•

 

Clear All Data

.  This button can also be used to clear ALL 

data and restore ALL settings to the factory default values. 

To Clear All Data and restore the factory default values:

 

1.

 

Power Off. 

2.

 

Hold the Reset Button down while you Power On. 

3.

 

Keep holding the Reset Button for a few seconds, until the 
RED LED has flashed TWICE. 

4.

 

Release the Reset Button. The Broadband Router is now using 
the factory default values. 

WAN port 
(10/100/1000BaseT) 

Connect the DSL or Cable Modem here. If your modem came with 
a cable, use the supplied cable. Otherwise, use a standard LAN 
cable. 

10/100/1000BaseT 
LAN connections 

Use standard LAN cables (RJ45 connectors) to connect your PCs to 
these ports. 

Note:  

Any LAN port on the Broadband Router will automatically func-
tion as an "Uplink" port when required. Just connect any port to a 
normal port on the other hub, using a standard LAN cable. 

Power port 

Connect the supplied power adapter here. 

 

 

Chapter 2

 

Installation 

This Chapter covers the physical installation of the Broadband Router. 

Requirements 

•

 

Network cables. Use standard 10/100/1000BaseT network (UTP) cables with RJ45 connectors. 

•

 

TCP/IP protocol must be installed on all PCs. 

•

 

For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem (for WAN port usage)

 

Содержание TWG-BRF114

























































































Отзывы:

Нет отзывов