TRENDnet TWG-BRF114 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 88

TRENDnet TWG-BRF114 Скачать руководство пользователя страница 16

Broadband Router User Guide

LAN Screen

Use the

LAN

link on the main menu to reach the

LAN

screen An example screen is shown below.

Figure 6: LAN Screen

Data - LAN Screen

TCP/IP

IP Address

IP address for the Broadband Router, as seen from the local LAN. Use
the default value unless the address is already in use or your LAN is
using a different IP address range. In the latter case, enter an unused IP
Address from within the range used by your LAN.

Subnet Mask

The default value 255.255.255.0 is standard for small (class "C")
networks. For other networks, use the Subnet Mask for the LAN
segment to which the Broadband Router is attached (the same value as
the PCs on that LAN segment).

DHCP Server

•

If Enabled, the Broadband Router will allocate IP Addresses to
PCs (DHCP clients) on your LAN when they start up. The default
(and recommended) value is Enabled.

•

If you are already using a DHCP Server, this setting must be
Disabled, and the existing DHCP server must be re-configured to
treat the Broadband Router as the default Gateway. See the fol-
lowing section for further details.

•

The

Start IP Address

and

Finish IP Address

fields set the values

used by the DHCP server when allocating IP Addresses to DHCP
clients. This range also determines the number of DHCP clients
supported.

See the following section for further details on using DHCP.

Buttons

Save

Save the data on screen.

Cancel

The "Cancel" button will discard any data you have entered and reload
the file from the Broadband Router.

DHCP

What DHCP Does

A DHCP (Dynamic Host Configuration Protocol)

Server

allocates a valid IP address to a DHCP

Client

(PC or device) upon request.

•

The client request is made when the client device starts up (boots).

•

The DHCP Server provides the

Gateway

and

DNS

addresses to the client, as well as allocating an IP Address.

14

«
...
14
15
16
17
18
...
»

Содержание TWG-BRF114

























































































Отзывы:

Нет отзывов