TRENDnet TWG-BRF114 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 88

TRENDnet TWG-BRF114 Скачать руководство пользователя страница 19

PC Configuration

The first step is to check the PC's TCP/IP settings.

The Broadband Router uses the TCP/IP network protocol for all functions, so it is essential that the TCP/IP protocol be installed and
configured on each PC.

TCP/IP Settings - Overview

If using the default Broadband Router settings, and the default Windows TCP/IP settings, no changes
need to be made.

•

By default, the Broadband Router will act as a DHCP Server, automatically providing a suitable IP Address (and related informa-
tion) to each PC when the PC boots.

•

For all non-Server versions of Windows, the default TCP/IP setting is to act as a DHCP client.

If using a Fixed (specified) IP address, the following changes are required:

•

The

Gateway

must be set to the IP address of the Broadband Router

•

The

DNS

should be set to the address provided by your ISP.

If your LAN has a Router, the LAN Administrator must re-
configure the Router itself. Refer to Chapter 8 - Ad-
vanced Setup for details.

17

«
...
17
18
19
20
21
...
»

Содержание TWG-BRF114

























































































Отзывы:

Нет отзывов