TRENDnet TWG-BRF114, Руководство пользователя, Страница: 23 / 88

PC Configuration
Figure 14: Windows NT4.0 - IP Address
3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify an IP Address , as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this is recommended . By default, the Broadband Router will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the Broadband Router.
Specify an IP Address
If your PC is already configured, check with your network administrator before making the following changes.
1. The Default Gateway must be set to the IP address of the Broadband Router. To set this:
•
Click the Advanced button on the screen above.
•
On the following screen, click the Add button in the Gateways panel, and enter the Broadband Router's IP address, as shown
in Figure 15 below.
•
If necessary, use the Up button to make the Broadband Router the first entry in the Gateways list.
21