TRC ELECTRONICS, INC.
Providing exceptional customer service since 1982
TRC ELECTRONICS, INC.
1.888.612.9514
www.
trcelectronics
.com
Designers Manual
Advanced Energy CoolX600 Series
TTaabbllee 44‑‑11.. Part number digit description (Continued)
PPaarrtt N
Nuum
mbbeerr D
Diiggiitt
FFeeaattuurree
O
Oppttiioonnss aanndd
D
Deessccrriippttiioonnss
P = Preset; voltage
adjustments, series,
parallel outputs
11
Connectors and leakage
- = Input screw terminal
connector, nominal
leakage current
1 = IEC 320 input terminal
4 = Input screw terminal
connector, 150 μA leakage
current
5 = IEC 320 input
terminal, 150 μA leakage
current
12
Aux voltage
A = 12 V/1.97 A isolated
bias supply voltage
B = 5 V/4.7 A isolated
bias supply voltage
13
Frame type
Not used or - = Standard,
open-framed
L = Covered
14
Reserved
Not included in
configuration order
Specifying Modules in the Part Number
Digits 6 – 9 in a CoolX part number specify the modules in the chassis slots 1 – 4.
The following sections detail how to specify the different types of modules in a
CoolX part number.
Standard, Dual, and Wide-trim Modules
You can specify all standard, dual, and wide-trim modules using the third letter of the
type of module (for example, "A" for a CmA module). Put the letter in the part
number digit that corresponds to the appropriate chassis slot.
For example, a CoolX unit with a CmB module in slot 3 would have "B" in the
eighth digit of the unit part number. A CoolX unit with a CmD module in slot 1
would have "D" in the sixth digit of the unit part number.
Table 4
‑
1
on page 4
‑
2
specifies which part number digit corresponds to which chassis slot.
Bulk Modules
Advanced Energy
®
CoolX
®
600 Modular Power Supply
57010208-00B
Configuration
4‑3
