Installation
(for qualified installers only)
7
© Travis Industries
4080207
100-01185_000
Packing List
• Propane Conversion Kit
•
Log Set
• Rear Vent Configuration Kit (insulation)
• Firestop
Additional Items Required
•
Direct Vent
•
Gas Line Equipment (shutoff valve, pipe, etc.)
•
Electrical Equipment (min. 14 gauge, grounded line)
•
Face
Recommended Installation Procedure
1
Install the optional equipment (do not install the logs) – we recommend the following order:
a)
LP Conversion (if applicable) – NOTE: leave the burner removed until after the liner and
accent light are installed (if applicable). If using the Omega remote, install the modulating
regulator during LP conversion.
b) Liner (if applicable)
c)
Accent Light (if applicable)
NOTE: Do not install the accent light wiring harness or rheostat if using the omega remote.
NOTE: Leave the control cover removed if using the blower
d) Blower
NOTE: Do not install the rheostat if using the omega remote.
e) Remote
2
Frame the opening for the fireplace. Make sure to allow for vent installation.
3
This fireplace is designed to accommodate 1/2" drywall or 1/2” drywall with 3/8” tile (see "Nailing
Brackets" on page 17 for details). Secure the fireplace to the framing.
NOTE: If the facing is not 1/2" or 7/8" thick, follow the directions below:
Place a strip of facing material to both sides of the fireplace opening (NOTE: the strips will
be removed after the fireplace is secured). The facing thickness must represent the total
thickness of the finished facing (e.g.: If tile is to be used, include the thickness of the
backboard, tile, and tile adhesive). Insert the fireplace into the framing. Slide it back until
the front edge of the fireplace is flush with the facing material. Secure the fireplace using
the plates located along the base of the fireplace.
4 Complete the gas line installation. Complete the electrical hook-up.
5 Complete the vent installation.
6 Install the hearth (if applicable).
7 Install the drywall and facing (if applicable).
8 Install the mantel (if applicable).
9
Finalize the installation (see page 39) and install the grill or face.
