4 6
Optional Equipment
(for qualified installers only)
© Travis Industries
4080207
100-01185_000
LP Conversion Instructions
Install the conversion kit prior to installing the gas line to ensure proper gas use.
1
Remove the glass (see page 41). Remove the logs and coals (if installed - page 43)
2
Remove the burner (see illustration below).
Lift up on the left
side of the burner,
then slide the
burner to the left
and up to remove.
Lift the pilot hood off the pilot
assembly (you may need to
pull hard to remove).
b
AA
AA
AA
a
AA
AA
The mixing tube slides
onto the orifice.
Burner Replacement:
Make sure the orifice on the firebox
floor inserts into the fitting on the
bottom of the burner.
Before replacing the burner, slide the
air control all the way to the right.
After replacing the burner
re-attach the pilot hood.
Make sure the burner is fully seated and pilot hood lines up with the
burner holes at the rear edge of theburner.
