Traub TNL20, Руководство по эксплуатации

Страница: 71 / 74

71
Transport and installation
TNL20
DTE022DE - 24.06.2021
Switching on the machine
Before switching on the machine, the key switch must be in the
“Production mode” position to prevent unexpected starting or
unexpected movement.
Before initial commissioning, the machine owner is required to
check the safe condition of the machine, including its safety devic-
es. This must also be done during operation at reasonable regular
intervals, but at least after each repair and maintenance.
• Turn on from the main switch on the control cabinet
• Switch on the NC control from the machine operating panel
• Press the Reset key
(any internally pending error messages are deleted).
• Open and close the work area door.
The functionality of the door switches must be checked by open-
ing and closing the work area door. Only if the safety devices
respond, the machine can be started.
• Switch on the drives.
0
I
NC I
RESET