Trane Tracer ZN524, Руководство по диагностике для владельца установки

Страница: 15 / 52

CNT-SVX11A-EN 15
Installation & Wiring
Installing the Wall-Mounted
Zone Sensor (Optional)
Zone sensor location is an important
element of effective room control and
comfort.
The best sensor location is typically on
a wall, remote from the HVAC unit.
Readings at this location assure that the
desired setpoint is achieved across the
space, not just near the unit itself.
Note: It may be necessary to
subdivide the zone with multiple
units to ensure adequate control
and comfort throughout the space.
The following are typical areas where
the zone sensor should not be
mounted:
• Near drafts or “dead spots” (e.g.,
behind doors or corners);
• Near hot or cold air ducts;
• Near radiant heat (e.g., heat emitted
from appliances or the sun);
• Near concealed pipes or chimneys;
• On outside walls or other non-
conditioned surfaces; or
• In air flows from adjacent zones or
other units.
The communications link is not con-
nected in the factory. Communications
could be wired to the wall-mounted
sensor if desired.
Figure 11: Proper zone sensor placement