RLC-SVU01B-E4
22
Controls Interface
Setpoint Screen
The setpoint screen is a two-part
screen. Screen 1 lists all setpoints
available to change along with their
current value. The operator selects a
setpoint to change by touching
either the verbal description or
setpoint value. Doing this causes the
screen to switch to Screen 2.
In Screen 1 the language setpoint
will always be the last setpoint in
the list. This will facilitate language
changes by placing that control in a
standard position across all CH.530
product lines.
Screen 2 displays the current value
of the chosen setpoint in the upper
½ of the display.
It is displayed in a changeable
format consistent with its type.
Binary setpoints are considered to
be simple two state enumeration
and will use radio buttons. Analog
setpoints are displayed as spin
buttons. The lower half of the screen
is reserved for help screens.
Modes
Chiller
Compressor
A
Auto
uto
Stop
Auto Local or Remote:
Front Panel Chilled Water Setpoint:
Front Panel Current Limit Setpoint:
Condenser Limit Setpoint:
Low Ambient Lockout Setpt:
Low Ambient Lockout:
Local
7 C
100%
XX % HPC
1.7 C
Enabled
