Installation
AFDR-SVN001D-EN
47
7. Use provided tie wraps to secure the cores to the core
bracket and use tie wraps to keep the power wire
positioned in the center of the cores.
8. Install ground terminals in the control panel and
connect all ground wires. Drill as needed and use
tapping screws and star washers provided. See
for location.
9. Align cover over motor terminals and drill four holes
for mounting. Install cover over motor terminals using
four screws (provided); refer to
.
Figure 63.
Figure 64.
Figure 65.
Figure 66.
Cover installation
Wire tap supplied
on all options
