Installation
60
AFDR-SVN001D-EN
6. The download’s progress is indicated by a bar at the
bottom of the Application Software Download dialog
box.
The remainder of the software installation process is very
similar to the procedure included in
Installation and Configuration,” p. 52
the configuration and settings are carried through in this
application. Proceed with
,
(included in the
procedure
“UC800 Software Installation and
).
Drive Settings
Important:
Any AFDR drive module menu parameter
numbers not listed in this manual are non-
Trane specific program parameters. All
non-Trane specific program parameter
values have been set by the manufacturer
before shipment, to provide optimum drive
performance. Under no circumstances
should any of the pre-set values in these
menu parameters be changed unless
specifically directed to do so by a factory
engineer or a factory technical support
person.
Note:
Please refer to BAS-SVP04*-EN, or the most recent
version (
Programming Guide: TR200
),for full
program parameter details and descriptions, and
the instructions necessary to operate the Local
Control Panel (LCP) and program the necessary
drive parameters.
Refer to
for a list of items that need to be set
in the frequency drive at startup. For additional
information, refer to the programming manual that is
shipped with the drive. The programming manual
includes a detailed section that discusses accessing the
parameters in the drive.
This process is summarized briefly below:
1. To access the parameters, press the
Main Menu
key.
2. If required, enter the password (
999
).
3. To select a parameter group, use the up/down arrow
keys to highlight the parameter group, and then press
the
Enter
key to access that group.
4. Use the up/down arrow keys to access the parameter
number, and then press the
OK
key.
5. Use the up/down arrow keys to change the parameter,
and then press the
OK
key to change the setting.
Figure 102.
