Installation
56
AFDR-SVN001D-EN
Important:
Nameplate
values, including
Product
Model Number
,
Product Serial Number
,
and
Product Sales Order
must be set for
the unit as well; refer to
.
9. Verify all configuration settings and then click the
Save
. Tracer TU downloads the configuration settings
to the target UC800 controller. A progress dialog box
appears, followed by a resetting target dialog box.
After the configuration has been stored successfully,
click
OK
to close the dialog box.
10. Tracer TU automatically displays its
Binding
tab. At
this time, all new LLIDs must be bound. If there is a mix
of existing and new LLIDs, Trane recommends that all
existing LLIDs be unbound; then, rebind existing LLIDs
and bind new LLIDs.
Important:
For more information about binding LLIDs,
refer to RCDA-SVN001*-EN (
Installation
Instructions: Tracer AdaptiView™ RTHD
Rotary Chiller Display Upgrade Kit
) or the
original RTHD chiller
Installation,
Operation, and Maintenance
manual.
Figure 90.
Figure 91.
Figure 92.
Figure 93.
