Toyota Land Cruiser 2004 Скачать руководство пользователя

Страница: 36 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

The system will automatically be set after

30 seconds. When the system is set, the

indicator light will start flashing again.

4. After making sure the indicator light

starts flashing, you may leave the ve-

hicle.

Never leave anyone in the vehicle when

you set the system, because unlocking
from the inside will activate the system.

WHEN THE SYSTEM IS SET
Activating the system

The system will sound the alarm under

the following conditions:

If any of the side doors is unlocked or

opened without the key or wireless re-
mote control key, or if the back door

or hood is forcibly opened

If the battery terminal is disconnected

and then reconnected

The indicator light will come on when the
system is activating.

If any of the side door or back door is

unlocked without the key or wireless re-

mote control key and the key is not in the
ignition switch, all the side doors and

back door will be automatically locked

again.
After one minute, the alarm will automati-

cally stop and the indicator light will starts

flashing again.

Reactivating the alarm

Once  set,  the  system  automatically  resets
the  alarm  after  the  alarm  stops.
The  alarm  will  activate  again  under  the
same

circumstances

described

“Activating the system”.

Stopping the alarm

The alarm will be stopped by the following

two ways:

Turn the ignition key from the “LOCK”

to “ON” position.

Unlock any of the side doors or back

door with the key or wireless remote

control key.

These ways cancel the system at the

same time.

TESTING THE SYSTEM

1. Open all the windows.
2. Set the system as described above.

The side doors and back door should

be locked with the key or wireless re-
mote control key. Be sure to wait until

the indicator light goes off or starts

flashing.

3. Unlock any side door or back door

from the inside. The system should ac-

tivate the alarm.

4. Stopping the alarm as described above.
5. Repeat this operation for the other

doors, back door and hood. When test-

ing the hood, also check that the sys-

tem is activated when the battery ter-
minal

disconnected

and

then

reconnected.

If the system does not work properly,

have it checked by your Toyota dealer.

Содержание Land Cruiser 2004
















































































































































































































































































































































Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Похожие инструкции для Land Cruiser 2004

Бренды по названию

Популярные бренды

Toyota Land Cruiser 2004, Руководство пользователя

Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Похожие инструкции для Land Cruiser 2004

Бренды по названию

Популярные бренды