Toyota Land Cruiser 2004 страница 43 Скачать руководство пользователя

Страница: 43 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

Front passenger seat

CAUTION

The SRS front passenger airbag also
deploys with considerable force, and

can cause death or serious injury es-

pecially if the front passenger is very
close to the airbag. The front passen-

ger seat should be as far from the

airbag as possible with the seatback
adjusted, so the front passenger sits

upright.

Front seats (with SRS side airbags)

CAUTION

The SRS side airbags are installed in
the driver and front passenger seats.

Observe the following precautions.

Do not lean against the front door
when the vehicle is in use, since

the side airbag inflates with consid-

erable speed and force. Otherwise,
you may be killed or seriously in-

jured.

Do not use seat accessories which

cover the area where the side air-

bags inflate. Such accessories may
prevent the side airbags from acti-

vating correctly, causing death or

serious injury.

Do not modify or replace the seats

or upholstery of the seats equipped
with side airbags. Such change may

prevent the side airbag system from

activating correctly, disable the sys-
tem or cause the side airbags to

inflate accidentally, resulting in

death or serious injury.

CAUTION

Do not adjust the seat while the

vehicle is moving as the seat may

unexpectedly move and cause the

driver to lose control of the vehicle.

Be careful that the seat does not

hit a passenger or luggage.

After adjusting the seat position,

try sliding the seat forward and

backward to make sure it is locked

in position.

After adjusting the seatback, push
your body back against the seat to

make sure the seat is locked in

position.

Do not put objects under the seats.

Otherwise, the objects may interfere

with the seat

−

lock mechanism and

the seat may suddenly move, caus-

ing the driver to lose control of the

vehicle.

While adjusting the seat, do not put

your hands under the seat or near

the moving parts. Otherwise, your

hands or fingers may be caught and

injured.

—Seat adjustment

precautions

Содержание Land Cruiser 2004
















































































































































































































































































































































Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Похожие инструкции для Land Cruiser 2004

Бренды по названию

Популярные бренды

Toyota Land Cruiser 2004, Руководство пользователя

Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Похожие инструкции для Land Cruiser 2004

Бренды по названию

Популярные бренды