Toyota Land Cruiser 2004 Скачать руководство пользователя страница 223

Страница: 223 / 335

215

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

—Engine number

The engine number is stamped on the

engine block as shown.

Theft prevention labels

Your new vehicle carries theft preven-

tion labels which are approximately 56

mm (2.20 in.) by 16 mm (0.63 in.).

The purpose of these labels is to reduce

the incidence of vehicle thefts by facilitat-

ing the tracing and recovery of parts from
stolen vehicles. The label is designed so

that once it is applied to a surface, any

attempt to remove it will result in destroy-
ing the integrity of the label. Transferring

these labels intact from one part to anoth-

er, will be impossible.

NOTICE

You should not attempt to remove the
theft prevention labels as it may vio-

late certain state or federal laws.

Suspension and chassis

CAUTION

Do not modify the suspension/chassis
with lift kits, spacers, springs, etc. It

can cause dangerous handling charac-

teristics, resulting in loss of control.

Содержание Land Cruiser 2004
















































































































































































































































































































































Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Бренды по названию

Популярные бренды

Toyota Land Cruiser 2004, Руководство пользователя

Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Бренды по названию

Популярные бренды