Toyota Land Cruiser 2004 Скачать руководство пользователя

Страница: 152 / 335

144

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

If you need acceleration—for example,

when passing—depress the accelerator

pedal enough for the vehicle to exceed
the set speed. When you release it, the

vehicle will return to the speed set prior

to the acceleration.

CANCELLING THE PRESET SPEED

You can cancel the preset speed by:

a. Pulling the control lever in the

“CANCEL” direction and releasing it.

b. Depressing the brake pedal.
c. Pushing the “CRUISE ON

−

OFF” switch.

If the vehicle speed falls below about 40

km/h (25 mph), the preset speed will auto-

matically cancel out.
If the vehicle speed drops 16 km/h (10

mph)  below  the  preset  speed,  the  preset
speed  will  also  automatically  cancel  out.
If  the  preset  speed  automatically  cancels

out for other than the above cases, have
your vehicle checked by your Toyota deal-

er at the earliest opportunity.

RESETTING TO A FASTER SPEED

Push the lever up in the “+ RES” direction

and hold it. Release the lever when the
desired speed is attained. While the lever

is held up, the vehicle will gradually gain

speed.
However, a faster way to reset is to ac-

celerate the vehicle and then push the
control lever down in the “– SET” direc-

tion.

RESETTING TO A SLOWER SPEED

Push the lever down in the “– SET” direc-

tion and hold it. Release the lever when
the desired speed is attained. While the

lever is held down, the vehicle speed will

gradually decrease.
However, a faster way to reset is to de-

press the brake pedal and then push the
control lever down in the “– SET” direc-

tion.
Even if you downshift the transmission
from the “D” position to “4” with the cruise

control on, engine braking will not be ap-

plied because the cruise control is not
cancelled. To decrease the vehicle speed,

reset to a slower speed with the cruise

control lever or depress the brake pedal.
If you use the brake pedal, cruise control

is cancelled.

RESUMING THE PRESET SPEED

If the preset speed is cancelled by pulling

the control lever or by depressing the
brake pedal, pushing the lever up in the

“+ RES” direction will restore the speed

set prior to cancellation.
However, once the vehicle speed falls be-

low about 40 km/h (25 mph), the preset
speed will not be resumed.

CRUISE CONTROL FAILURE WARNING

If the “CRUISE” indicator light in the

instrument cluster flashes when using the

cruise control, press the “ON·OFF” button
to turn the system off and then press it

again  to  turn  it  on.
If  any  of  the  following  conditions  then  oc-
curs,  there  is  some  trouble  in  the  cruise

control system.

The indicator light does not come on.

The indicator light flashes again.

The indicator light goes out after it

comes on.

If this is the case, contact your Toyota

dealer and have your vehicle inspected.

Содержание Land Cruiser 2004
















































































































































































































































































































































Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Похожие инструкции для Land Cruiser 2004

Бренды по названию

Популярные бренды

Toyota Land Cruiser 2004, Руководство пользователя

Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Похожие инструкции для Land Cruiser 2004

Бренды по названию

Популярные бренды