Toyota Land Cruiser 2004 Скачать руководство пользователя

Страница: 135 / 335

127

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

(h) SRS Warning Light
This light will come on when the igni-

tion key is turned to the “ON” position.
After about 6 seconds, the light will go

off. This means the system of the air-

bag and front seat belt pretensioners
are operating properly.

The warning light system monitors the air-
bag sensor assembly, front airbag sen-

sors, side and curtain shield airbag sen-

sors, curtain shield airbag sensors,
driver’s seat position sensor, driver’s seat

belt buckle switch, front seat belt preten-

sioner assemblies, inflators, warning light,
roll sensing of curtain shield airbags off

indicator light, interconnecting wiring and

power sources.
If either of the following conditions occurs,

this indicates a malfunction somewhere in
the components monitored by the warning

light system. Contact your Toyota dealer

as soon as possible to service the ve-
hicle.

The light does not come on when the

ignition key is turned to the “ON” posi-

tion or remains on.

The light comes on or flashes while

driving.

If the light stays on, it indicates that the

driver and passenger airbags have a prob-

lem. If the light flashes, the side and cur-
tain shield airbags and/or the seat belt

pretensioners have a problem.

(i) “ABS” Warning Light
The light comes on when the ignition

key is turned to the “ON” position. If
the anti

−

lock brake system and the

brake assist system work properly, the

light turns off after a few seconds.
Thereafter, if either of the systems mal-

functions, the light comes on again.

When the “ABS” warning light is on (and
the brake system warning light is off), the

anti

−

lock brake system, the brake assist

system, the vehicle stability control sys-
tem and/or active traction control system

do/does  not  operate,  but  the  brake  system
still  operates  conventionally.
When  the  “ABS”  warning  light  is  on  (and

the brake system warning light is off), the
anti

−

lock brake system does not operate

so that the wheels could lock up during

a sudden braking or braking on slippery
road surfaces.

If either of the following conditions oc-

curs, this indicates a malfunction some-

where in the components monitored by
the warning light system. Contact your

Toyota dealer as soon as possible to

service the vehicle.

The light does not come on when the

ignition key is turned to the “ON” posi-

tion, or remains on.

The light comes on while you are driv-

ing.

A warning light turning on briefly during

operation does not indicate a problem.

CAUTION

If the “ABS” warning light remains on
together with the brake system warn-

ing light, immediately stop your ve-

hicle  at  a  safe  place  and  contact  your
Toyota  dealer.
In  this  case,  not  only  the  anti

−

lock

brake system will fail but also the
vehicle will become extremely unsta-

ble during braking.

Содержание Land Cruiser 2004
















































































































































































































































































































































Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Похожие инструкции для Land Cruiser 2004

Бренды по названию

Популярные бренды

Toyota Land Cruiser 2004, Руководство пользователя

Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Похожие инструкции для Land Cruiser 2004

Бренды по названию

Популярные бренды