Toyota Land Cruiser 2004 страница 256 Скачать руководство пользователя

Страница: 256 / 335

248

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

JUMP STARTING PROCEDURE

1. If the booster battery is installed in

another vehicle, make sure the vehicles
are not touching. Turn off all unneces-

sary lights and accessories.

2. If required, remove all the vent plugs

from the booster and discharged batter-

ies. Lay a cloth over the open vents
on the batteries. (This helps reduce the

explosion hazard, personal injuries and

burns.)

3. If the engine in the vehicle with the

booster battery is not running, start it

and let it run for a few minutes. During
jump starting, run the engine at about

2000 rpm with the accelerator pedal

lightly depressed.

Discharged battery

Positive

terminal

(“+” mark)

Jumper

cable

Booster

battery

Positive terminal

(“+” mark)

4. Make the cable connections in the or-

der a, b, c, d.
a. Connect the clamp of the positive

(red)  jumper  cable  to  the  positive  ( )
terminal  on  the  discharged  battery.
b.  Connect  the  clamp  at  the  other  end

of the positive (red) jumper cable to
the positive ( ) terminal on the booster

battery.

Discharged battery

Booster

battery

Negative

terminal (“

−

” mark)

Jumper cable

c. Connect the clamp of the negative

(black) jumper cable to the negative (

−

)

terminal  on  the  booster  battery.
d.  Connect  the  clamp  at  the  other  end
of  the  negative  (black)  jumper  cable  to

a solid, stationary, unpainted, metallic

point of the vehicle with the discharged
battery.
The recommended connecting point is

shown in the following illustration:

Содержание Land Cruiser 2004
















































































































































































































































































































































Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Похожие инструкции для Land Cruiser 2004

Бренды по названию

Популярные бренды

Toyota Land Cruiser 2004, Руководство пользователя

Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Похожие инструкции для Land Cruiser 2004

Бренды по названию

Популярные бренды