Toyota Land Cruiser 2004 Скачать руководство пользователя страница 325

Страница: 325 / 335

317

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

Service specifications

ENGINE

Valve clearance (engine cold), mm (in.):

Intake

0.15—0.25 (0.006—0.010)

Exhaust 0.25—0.35 (0.010—0.014)

Spark plug type:

DENSO

SK20R11

NGK

IFR6A11

Spark plug gap, mm (in.):

1.1 (0.043)

ENGINE LUBRICATION

Oil capacity (drain and refill), L (qt., Imp.

qt.)

With filter

6.8 (7.2, 6.0)

Without filter

6.4 (6.8, 5.6)

Oil grade:

“Toyota Genuine Motor Oil” is filled in

your Toyota vehicle. Use Toyota ap-
proved “Toyota Genuine Motor Oil” or

equivalent to satisfy the following grade

and  viscosity.
Oil  grade:
API  grade,  SL  “Energy

−

Conserving” or

ILSAC multigrade engine oil

Recommended oil viscosity:

SAE 5W

−

Temperature range anticipated before next oil

change

Please contact your Toyota dealer for fur-

ther details.

COOLING SYSTEM

Total capacity, L (qt., Imp. qt.)

Without rear heater

14.7 (15.5, 12.9)

With rear heater

15.4 (16.3, 13.6)

Coolant type:

“Toyota Super Long Life Coolant” is filled

in your Toyota vehicle at factory fill. In

order to avoid technical problems, only use
“Toyota Super Long Life Coolant” or similar

high quality ethylene glycol based non

−

sili-

cate, non

−

amine, non

−

nitrite, and non

−

bo-

rate coolant with long

−

life hybrid organic

acid  technology.
Do  not  use  plain  water  alone.
Please  contact  your  Toyota dealer  for  fur-

ther details.

BATTERY

Open voltage

∗

at 20

C (68

F):

12.6—12.8 V

Fully charged

12.2—12.4 V

Half charged

11.8—12.0 V

Discharged

∗

: Voltage that is checked 20 minutes af-

ter  the  key  is  removed  with  all  the  lights
turned  off
Charging  rates:

5 A max.

Содержание Land Cruiser 2004
















































































































































































































































































































































Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Бренды по названию

Популярные бренды

Toyota Land Cruiser 2004, Руководство пользователя

Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Бренды по названию

Популярные бренды