Toyota Land Cruiser 2004 Скачать руководство пользователя

Страница: 60 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

—Fastening 2

−

point seat belt

Lengthen

Tab

Buckle

Sit up straight and well back in the

seat. To fasten your belt, insert the tab
into the buckle.

You  will  hear  a  click  when  the  tab  locks
into  the  buckle.
If  the  belt  is  not  long  enough  for  you,  hold

the tab at a right angle to the belt and
pull on the tab.

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the lap portion of the belt is

not twisted.

Do not insert coins, clips, etc. in

the buckle as this may prevent you

from properly latching the tab and
buckle.

If the seat belt does not function
normally, immediately contact your

Toyota dealer. Do not use the seat

until the seat belt is fixed, because
it cannot protect an adult occupant

or your child from injury.

Too high

Adjust to a snug fit

Keep as low on hips as possible

Remove excess length of the belt and

adjust the belt position.

To shorten the belt, pull the free end of

the belt.
Position the lap belt as low as possible

on your hips—not on your waist, then ad-

just it to a snug fit.

CAUTION

Both high

−

positioned and loose

−

fit-

ting lap belts could cause serious in-

juries due to sliding under the lap belt

during a collision or other unintended
event. Keep the lap belt positioned as

low on hips as possible.

Содержание Land Cruiser 2004
















































































































































































































































































































































Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Похожие инструкции для Land Cruiser 2004

Бренды по названию

Популярные бренды

Toyota Land Cruiser 2004, Руководство пользователя

Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Похожие инструкции для Land Cruiser 2004

Бренды по названию

Популярные бренды