Toyota Land Cruiser 2004 Скачать руководство пользователя

Страница: 272 / 335

264

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

—Emergency towing

If towing is necessary, we recommend
you to have it done by your Toyota

dealer or a commercial tow truck ser-

vice.
If towing service is not available in an

emergency, your vehicle may be tempo-

rarily  towed  by  a  cable  or  chain  se-
cured  to  front  emergency  towing  hook.
Use  extreme  caution  when  towing  the

vehicle.

A  driver  must  be  in  the  vehicle  to  steer  it
and  operate  the  brakes.
Towing  in  this  manner  may  be  done  only

on hard

−

surfaced roads for a short dis-

tance and at low speeds. Also, the
wheels, axles, drive train, steering and

brakes must all be in good condition.

CAUTION

Use extreme caution when towing ve-
hicle. Avoid sudden starts or erratic

driving maneuvers which would place

excessive stress on the emergency
towing hook and towing cable or

chain. The hook and towing cable or

chain may break and cause serious
injury or damage.

NOTICE

Do not use front and rear eyelets.
It is not designed for towing.

Use only a cable or chain specifi-

cally intended for use in towing ve-
hicles. Securely fasten the cable or

chain to the towing hook provided.

Never tow a vehicle from the rear

with four wheels on the ground.

This may cause serious damage to
the transmission.

Before towing, release the parking brake

and put the transmission in “N”. Unlock

the center differential. The key must be in
“ACC” (engine off) or “ON” (engine run-

ning).

CAUTION

If the engine is not running, the pow-
er assist for the brakes and steering

will not work so steering and braking

will be much harder than usual.

Содержание Land Cruiser 2004
















































































































































































































































































































































Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Похожие инструкции для Land Cruiser 2004

Бренды по названию

Популярные бренды

Toyota Land Cruiser 2004, Руководство пользователя

Результаты поиска

Содержание Land Cruiser 2004

Отзывы:

Похожие инструкции для Land Cruiser 2004

Бренды по названию

Популярные бренды