Toyota 2002 Sequoia Скачать руководство пользователя страница 89

Страница: 89 / 329

02_SEQUOIA_U (L/O 0108)

2002 MY SEQUOIA_U (OM34418U)

Toyota strongly urges use of a
proper child restraint system which

conforms to the size of the child,

and is put on the rear seat. Accord-
ing to accident statistics, the child

is safer when properly restrained in

the rear seat than in the front seat.

Never put a rear

−

facing child re-

straint system on the front seat. In

the event of an accident, the force
of the rapid inflation of the airbag

can cause death or serious injury if

a rear

−

facing child restraint system

is put on the front seat.

Unless it is unavoidable, do not put
a forward

−

facing child restraint sys-

tem on the front seat.

A forward

−

facing child restraint sys-

tem should be allowed to be put on

the front seat only when it is un-
avoidable. Always move the seat as

far back as possible, because the

force of the deploying airbag could
cause death or serious injury to the

child.

On vehicles with side airbags, do
not allow the child to lean against

the front door or around the front

door even if the child is seated in
the child restraint system. It is dan-

gerous if the side airbags inflate,

because the impact could cause
death or serious injury to the child.

Make sure that you have complied

with all installation instructions pro-
vided

the

child

restraint

manufacturer and that the system is

properly secured.

A child restraint system for a small

child or baby must itself be properly

restrained on the seat with the lap por-
tion of the lap/shoulder belt. You must

carefully consult the manufacturer’s

instructions which accompany the child
restraint system.

To provide proper restraint, use a child

restraint system following the manufactur-
er’s instructions about the appropriate age

and size of the child for the child restraint

system.
Install the child restraint system correctly

following the instructions provided by its
manufacturer of the system. General

directions are also provided under the fol-

lowing illustrations.
The child restraint system should be

installed on the rear seat. According to
accident statistics, the child is safer when

properly restrained in the rear seat than

in the front seat.

—Child restraint system

Содержание 2002 Sequoia










































































































































































































































































































































Результаты поиска

Содержание 2002 Sequoia

Отзывы:

Бренды по названию

Популярные бренды

Toyota 2002 Sequoia, Руководство пользователя

Результаты поиска

Содержание 2002 Sequoia

Отзывы:

Бренды по названию

Популярные бренды