Toyota 2002 Sequoia Скачать руководство пользователя страница 148

Страница: 148 / 329

02_SEQUOIA_U (L/O 0108)

142

2002 MY SEQUOIA_U (OM34418U)

The traction control system will automati-

cally go on, and the “TRAC OFF” indicator

light will go off when you drive over 30
km/h (19 mph) even if the “TRAC OFF”

switch is pushed to cancel the traction

control system.
“TRAC OFF” indicator light comes on for

a few seconds when the ignition key is

turned to “ON”. It will come on again
when you push the “TRAC OFF” switch to

turn off the system.
In the following cases, contact your Toyota

dealer:

The indicator light does not come on
when the ignition key is turned “ON”.

The indicator light remains on after the
ignition is turned on.

The indicator light comes on with the
normal driving mode while driving.

“VSC/TRAC” warning light

This light warns that there is a problem
somewhere in the traction control system

or the vehicle skid control system.
The light will come on when the ignition

key is turned to “ON” and will go off after

a few seconds.

The brake actuator temperature increases

during continuous operation of the traction

control system or vehicle skid control sys-
tem such as on slippery roads. If the

brake actuator temperature becomes too

high while the traction control system or
vehicle skid control system is operating,

a buzzer will start to sound intermittently

to indicate that the traction control system
can no longer operate. In this case, imme-

diately  stop  your  vehicle  at  a  safe  place.
If  the  system  continues  to  operate,  the
buzzer  sound  changes  from  intermittent  to

continuous.

(The

continuous

buzzer

sounds for about 3 seconds.)
At the time the “VSC/TRAC” warning light

will come on and the traction control sys-
tem temporarily stops operating in order to

protect the brake actuator. (Although the

traction control system does not operate,
there is no problem to continue your driv-

ing.) The system will be automatically re-

stored  after  a  short  time  and  the  warning
light  goes  out.
If  the  light  comes  on  while  driving,  the
traction  control  system  does  not  work.

However, as conventional braking operates

when applied, there is no problem to con-
tinue your driving.

Содержание 2002 Sequoia










































































































































































































































































































































Результаты поиска

Содержание 2002 Sequoia

Отзывы:

Бренды по названию

Популярные бренды

Toyota 2002 Sequoia, Руководство пользователя

Результаты поиска

Содержание 2002 Sequoia

Отзывы:

Бренды по названию

Популярные бренды