Toyota 2002 Sequoia Скачать руководство пользователя страница 20

Страница: 20 / 329

02_SEQUOIA_U (L/O 0108)

2002 MY SEQUOIA_U (OM34418U)

REAR DOOR CHILD

−

PROTECTORS

Move the lock lever to the “LOCK”
position as shown on the label.

This feature allows you to lock a rear
door so it can be opened from the outside

only, not from inside. We recommend us-

ing this feature whenever small children
are in the vehicle.

CAUTION

Before driving, be sure that the doors
are closed and locked, especially

when small children are in the ve-

hicle. Along with the proper use of
seat belts, locking the doors helps

prevent the driver and passengers

from being thrown out from the ve-
hicle during an accident. It also helps

prevent the doors from being opened

unintentionally.

You can select the following modes of

the automatic locking and unlocking

functions. The initial mode is mode 1.

Mode 1—Automatic locking operation

linked to shift lever position

All doors are automatically locked when

the shift lever is moved out of “P”

position after the ignition switch is
turned to the “ON” position and all the

doors are closed.

Mode 2—Automatic locking operation
linked to vehicle speed

All doors are automatically locked when
the vehicle speed goes above about 20

km/h (12 mph).

Mode 3—Automatic unlocking opera-
tion linked to the ignition switch

All doors are automatically unlocked
when the driver’s door is opened within

10 seconds after the ignition switch is

turned to the “ACC” or “LOCK” posi-
tion, or the key is removed.

Mode 4—Automatic unlocking opera-
tion linked to shift lever position

All doors are automatically unlocked

when the selector lever is moved to
“P” position after the ignition switch is

turned to “ON” position.

—Automatic door locking and

unlocking functions

Содержание 2002 Sequoia










































































































































































































































































































































Результаты поиска

Содержание 2002 Sequoia

Отзывы:

Бренды по названию

Популярные бренды

Toyota 2002 Sequoia, Руководство пользователя

Результаты поиска

Содержание 2002 Sequoia

Отзывы:

Бренды по названию

Популярные бренды