Toyota 2002 Sequoia Скачать руководство пользователя страница 51

Страница: 51 / 329

02_SEQUOIA_U (L/O 0108)

2002 MY SEQUOIA_U (OM34418U)

From front

From rear

1. SEAT POSITION ADJUSTING LEVER

From front—
Hold the center of the lever and pull it

up. Then slide the seat to the desired

position  with  slight  body  pressure  and
release  the  lever.
From  rear—
Pull  the  lever  up.  Then  slide  the  seat

to the desired position and release the

lever.
When a person sits in the third seat

center position, adjust both seat cush-

ions to the same position.

Do not place anything under the seats. It

might interfere with the seat

−

lock mecha-

nism.

2. SEATBACK

ANGLE

ADJUSTING

LEVER

From  front—
Lean  forward  and  pull  the  lever  toward
you.  Then  lean  back  to  the  desired

angle  and  release  the  lever.
From  rear—
Push  down  the  lever.  Push  the  seatback

forward or pull it backward to the de-
sired angle and release the lever.

When a person sits in the third seat

center position, align both seatbacks at

the same angle.

CAUTION

Adjust both seat cushions to the
same position and align both seat-

backs at the same angle when a

person sits in the third seat center
position. Otherwise, the person can-

not wear the seat belt properly and

this may cause serious injuries in
a collision.

To reduce the risk of sliding under

the lap belt during a collision,
avoid reclining the seatback any

more than needed. The seat belts

provide maximum protection in a
frontal or rear collision when the

passengers are sitting up straight
and well back in the seats. If you

are reclined, the lap belt may slide

past your hips and apply restraint
forces directly to the abdomen.

Therefore, in the event of a frontal

collision, the risk of personal injury
may increase with increasing recline

of the seatback.

—Adjusting third seats

Содержание 2002 Sequoia










































































































































































































































































































































Результаты поиска

Содержание 2002 Sequoia

Отзывы:

Бренды по названию

Популярные бренды

Toyota 2002 Sequoia, Руководство пользователя

Результаты поиска

Содержание 2002 Sequoia

Отзывы:

Бренды по названию

Популярные бренды