Toyota 2002 Sequoia Скачать руководство пользователя страница 135

Страница: 135 / 329

02_SEQUOIA_U (L/O 0108)

129

2002 MY SEQUOIA_U (OM34418U)

(h) “VSC/TRAC” Warning Light

This light warns that there is a problem

somewhere in the vehicle skid control sys-
tem and traction control system (two

−

wheel drive models) or active traction con-

trol system (four

−

wheel drive models).

The light will come on when the ignition

key  is  turned  to  “ON”  and  will  go  off  after
a  few  seconds.
If  the  light  comes  on  while  driving,  the

system does not work. However, as con-
ventional braking operates when applied,

there is no problem to continue your driv-

ing.
In the following cases, contact your Toyota

dealer:

The warning light does not come on

after the ignition key is turned to “ON”.

The warning light remains on after the

ignition key is turned to “ON”.

The warning light comes on while driv-

ing.

(i) Open Door Warning Light

This light remains on until all the side

doors and back door are completely
closed.

(j) SRS Warning Light
This light will come on when the igni-

tion key is turned to the “ON” position.

After about 6 seconds, the light will go
off. This means the system of the air-

bag and front seat belt pretensioner are

operating properly.

The warning light system monitors the air-

bag sensor assembly, front airbag sen-
sors, side and curtain shield airbag sen-

sors,

front

seat

belt

pretensioner

assemblies,  inflators,  warning  light,  inter-
connecting  wiring  and  power  sources.
If  either  of  the  following  conditions  occurs,
this  indicates  a  malfunction  somewhere  in

the parts monitored by the warning light

system. Contact your Toyota dealer as
soon as possible to service the vehicle.

The light does not come on when the

ignition key is turned to the “ACC” or
“ON” position or remains on.

The light comes on or flashes while
driving.

(k) Key Reminder Buzzer

This buzzer reminds you to remove the

key when you open the driver’s door with
the ignition key in the “ACC” or “LOCK”

position.

(l) Unengaged “Park” Warning Light

This light warns that the transmission

“Park” mechanism is not engaged. If the
front drive control lever is in the “N” posi-

tion while the selector lever is in the “P”

position, the transmission will disengage
and the wheels will not lock.

CAUTION

To restore the park function, shift the
front drive control lever out of “N”,

or the vehicle can move.

Содержание 2002 Sequoia










































































































































































































































































































































Результаты поиска

Содержание 2002 Sequoia

Отзывы:

Бренды по названию

Популярные бренды

Toyota 2002 Sequoia, Руководство пользователя

Результаты поиска

Содержание 2002 Sequoia

Отзывы:

Бренды по названию

Популярные бренды