Toyota 2002 Sequoia Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 329

Toyota 2002 Sequoia Скачать руководство пользователя страница 39

02_SEQUOIA_U (L/O 0108)

33

2002 MY SEQUOIA_U (OM34418U)

OPERATING FROM INSIDE
To operate the moon roof, use the

switches between the personal lights.

The moon roof works when the ignition

switch is in the “ON” position.

Key off operation:

If all the doors are

closed, it works for 43 seconds even after

the  ignition  switch  is  turned  off.  It  stops
working  when  any  of  the  doors  is  opened.
Sun  shade  operation—
The  sun  shade  can  be  opened  or  closed

by  hand.
Sliding  operation—
To  open:  Push  the  switch  on  the  “

!

”

(rear) side.
The roof will open and stop partway 135

mm (5.3 in.) from the fully opened posi-
tion. When you push “

!

” (rear) side

again, the moon roof will open fully. To

stop the roof partway, push the same side
or “

"

” (front) side while the roof is mov-

ing.
As driving with the moon roof opened fully

will cause wind throbs, we recommend

you to drive with the moon roof partway
135 mm (5.3 in.) from the fully opened

position.

The sun shade will be opened together

with the roof.
To close: Push the switch on the “

"

”

(front)  side.
The  roof  will  fully  close.  To  stop  the  roof
partway,  push  the  same  side  or  “

!

” (rear)

side  briefly.
Tilting  operation—
To  tilt  up:  Push  the  switch  on  the  “UP”

side.
To lower: Push the switch on the opposite

side  of  “UP”.
You  may  stop  the  moon  roof  at  any  de-
sired  position.  The  roof  will  move  while

the switch is being pushed and stop when

released.

Jam protection function:

During closing

operation, the moon roof stops and opens
half way if something gets caught between

the moon roof and frame.
If the moon roof receives a strong impact,

this function may work even if nothing is

caught.

«
...
37
38
39
40
41
...
»

Содержание 2002 Sequoia










































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды