Toyota 2001 Sequoia Скачать руководство пользователя страница 50

Страница: 50 / 325

01_SEQUOIA_U (L/O 0009)

2001 SEQUOIA (OM34414U)

2. Take the holding strap out of its

hole, and hook the strap onto the
assist grip. Then, pull the strap on

the free end to secure the seat.

When returning the second seat to its

original position, put the holding strap into

the hole.

CAUTION

When folding up the second seats, fix
the seats securely by adjusting the

length of the holding strap. Failure to

do so may cause an unexpected acci-
dent or severe injury in the event of

emergency braking or a collision.

WHEN

RETURNING

THE

SECOND

SEATS
If you cannot raise the seatback be-

cause of the locked seat belt, do not
try it forcibly. Release the lock of the

seat belt in the following way. Push in

the lower front edge of the seatback
cushion to slacken the seat belt (1) and

let the seat belt retract a little (2).

CAUTION

When  returning  the  seats  to  their
original  position:
Make  sure  the  seat  belts  are  not

twisted or caught in the seatback
and are arranged in their proper

position and are ready to use.
Be careful not to get your hands or

feet  pinched  in  the  seat.
Make  sure  the  seat  is  securely
locked  by  pushing  forward  and  rear-

ward on the top of the seatback or

by trying to pull up the edge of the
bottom cushion. Failure to do so

will prevent seat belt from operat-
ing properly.

Содержание 2001 Sequoia






































































































































































































































































































































Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды

Toyota 2001 Sequoia, Руководство пользователя

Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды