background image

M S D   I G N I T I O N

  •   w w w . m s d i g n i t i o n . c o m  •   ( 9 1 5 )   8 5 7 - 5 2 0 0   •   FA X   ( 9 1 5 )   8 5 7 - 3 3 4 4

MSD Programmable Fuel Booster

PN 2351

 

Parts Included: 

 

1 - Programmable Fuel Booster, PN 2351 

1 - Software CD 

1 - Parts Bag

 

1 - Harness 

1 - USB Cable

Figure 1 Recommended Wiring, General Application. 

USB PORT

ALERT LED

ORANGE

CUT

FACTORY 12 VOLTS

FROM INERTIA SWITCH

RED

1/8” DIAMETER VACUUM 

HOSE TO INTAKE MANIFOLD

RED

BLACK

FUEL PUMP +

INDICATES CONNECTION

X

The Programmable Fuel Pump Booster will increase the voltage to the fuel pump in proportion to manifold 

boost pressure. The maximum voltage output is 22. The minimum output will be the battery voltage.

Note:

 It is recommended to have the Service Manual for your vehicle to identify the original wiring and fuel 

pump relay.

RATING:

 Continuous Power: 275 Watt, Peak Power: 375 Watt (one minute)

INSTALLATION 

The MSD Fuel Pump Booster must be wired inline with the factory fuel pump relay. The factory has safety 

features built in, such as an inertia switch and high pressure shut-off which must be retained.
The MSD Fuel Pump Booster can be mounted in any position and is completely potted with a polyurethane 

compound for vibration resistance. Keep the unit away from direct engine heat sources and make sure all 

of the wiring reaches their connections. Also, allow access to the USB port.
Use the unit as a template and mark the mounting holes. Remove the unit and drill the holes using a 3/16" 

bit. Mount the unit with the 

supplied  screws.  With  the 

unit mounted, route the wiring 

to  their  connections.  Also 

connect the boost pressure 

line to the booster and intake 

manifold (Figure 1).

ORANGE (18-GAUGE, long)

OEM Fuel Pump Power (12V)

WIRING

RED (12-GAUGE, long)

RED (12-GAUGE, short)

BLACK (12-GAUGE, short)

Pump (+) Positive lead to Fuel Pump

Battery (+) 12V

Battery (-) Ground

Содержание 2351

Страница 1: ...k Power 375 Watt one minute InSTALLATION The MSD Fuel Pump Booster must be wired inline with the factory fuel pump relay The factory has safety features built in such as an inertia switch and high pressure shut off which must be retained The MSD Fuel Pump Booster can be mounted in any position and is completely potted with a polyurethane compound for vibration resistance Keep the unit away from di...

Страница 2: ...your CD Drive and click on the Setup exe file The MSDView wizard will walk you through the setup Note If the net framework is not installed on your PC the MSDView software will prompt the downloadandsetup ClickAccepttobeginthe udpate and follow the steps Figure 2 2 You will need to answer several questions such as a default location the available disk space and permissions Figure 3 The MSDView wil...

Страница 3: ...ure 4 as the MAP reading increases from 14 5 p s i the pump voltage will increase First Time Product Connection The first time the MSD is connected to your PC a driver will need to be installed on your PC 1 Connect the supplied USB harness to the PC and the MSD The Found New Hardware Wizard window will open and walk you through the driver installation steps Figure 5 2 The Wizard will detect the Co...

Страница 4: ...able for special or consequential damages Intended normal use means that this item is being used as was originally intended and for the original application as sold by MSD Ignition Any modifications to this item or if it is used on an application other than what MSD Ignition markets the product the warranty will be void It is the sole responsibility of the customer to determine that this item will...

Отзывы: