Toyota 2001 Sequoia Скачать руководство пользователя страница 57

Страница: 57 / 325

01_SEQUOIA_U (L/O 0009)

2001 SEQUOIA (OM34414U)

2. Pull the center handle (2) up while

holding up the left side lever (1) un-
der the seat, lift the seat and remove

it toward you.

Removing the third seats will enlarge the

luggage compartment. See “Luggage stow-

age precautions” on page 222 in Section
2 for precautions in loading luggage.

To reinstall the third seats, do this;

1. Hook the front legs to the front an-

chors.

2. Lock the rear legs on the rear an-

chors.

The direction marked “L” or “R”, which
shows the location, is on the rear of

each seat cushion, so install each seat

according to the mark.

CAUTION

When removing or reinstalling the
seat, observe the following to prevent

personal injury:

Do not fold or remove the seat
while the vehicle is moving.

Be careful not to get your hands or
feet pinched in the seat.

Be careful not to hit the removed

seat against a person or drop it on
yourself.

After folding or installing the seat,
push it forward and backward to

make sure it is locked in position.

To prevent personal injury in a colli-

sion or sudden stop:

Do not sit on or place anything on
the folded seatback while driving.

Do not leave the removed seat
loose in the vehicle.

Do not try to sit on or place any-

thing on the removed seat.

When reinstalling the seat, be care-

ful not to hit the seat against you
or inside of the vehicle.

Содержание 2001 Sequoia






































































































































































































































































































































Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды

Toyota 2001 Sequoia, Руководство пользователя

Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды