Toyota 2001 Sequoia Скачать руководство пользователя страница 100

Страница: 100 / 325

01_SEQUOIA_U (L/O 0009)

2001 SEQUOIA (OM34414U)

1. Sit the child on a booster seat. Run

the lap and shoulder belt through or
around the booster seat and child fol-

lowing the instructions provided by its

manufacturer and insert the tab into
the buckle taking care not to twist the

belt.

Make sure the shoulder belt is correctly

across the child’s shoulder and that the

lap belt is positioned as low as possible
on child’s hips. See “Seat belts” for de-

tails.

CAUTION

Always make sure the shoulder belt
is positioned across the center of

child’s shoulder. The belt should be

kept away from child’s neck, but
not falling off child’s shoulder. Fail-

ure to do so could reduce the

amount of protection in an accident
and cause serious injuries in a col-

lision.

Both high

−

positioned lap belts and

loose

−

fitting belts could cause seri-

ous injuries due to sliding under

the lap belt during a collision or
other unintended result. Keep the

lap belt positioned as low on a
child’s hips as possible.

For child’s safety, do not place the

shoulder belt under child’s arm.

After inserting the tab, make sure

the tab and buckle are locked and
that the lap and shoulder portions

of the belt are not twisted.

Do not insert coins, clips, etc. in
the buckle as this may prevent your

child from properly latching the tab

and buckle.

If the seat belt does not function
normally, it cannot protect your

child from injury. Contact your

Toyota dealer immediately. Do not
use the seat until the seat belt is

fixed.

Содержание 2001 Sequoia






































































































































































































































































































































Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды

Toyota 2001 Sequoia, Руководство пользователя

Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды