Toyota 2001 Sequoia Скачать руководство пользователя страница 74

Страница: 74 / 325

01_SEQUOIA_U (L/O 0009)

2001 SEQUOIA (OM34414U)

The SRS (Supplemental Restraint Sys-

tem) front airbags are designed to pro-
vide further protection for the driver

and front passenger in addition to the

primary safety protection provided by
the seat belts.

In response to a severe frontal impact,
the SRS front airbags work together with

the seat belts to help reduce injury by

inflating. The SRS front airbags help to
reduce injuries mainly to the driver’s or

front passenger’s head or chest caused by

directly hitting the steering wheel or dash-
board. The front passenger airbag is acti-

vated even with no passenger in the front

seat.
Be sure to wear your seat belt properly.

Your vehicle is equipped with a crash

sensing and diagnostic module, which will

record the use of the seat belt restraint
system by the driver and front passenger

when the SRS front airbags are inflated.

CAUTION

A driver or front passenger too close
to the steering wheel or dashboard

during airbag deployment can be

killed or seriously injured. Toyota
strongly recommends that:

The driver sit as far back as pos-

sible from the steering wheel while
still maintaining control of the ve-

hicle.

The front passenger sit as far back

as possible from the dashboard.

All vehicle occupants be properly
restrained using the available seat

belts.

This indicator comes on when the igni-

tion key is turned to the “ON” position.
It goes off after about 6 seconds. This

means the SRS front airbags are oper-

ating properly.

This warning light system monitors the

airbag sensor assembly, front airbag sen-
sors, inflators, warning light, interconnect-

ing wiring and power sources. (For details,

see “Service reminder indicators and
warning buzzers” on page 125 in Section

−

5.)

SRS driver and front

passenger airbags

Содержание 2001 Sequoia






































































































































































































































































































































Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды

Toyota 2001 Sequoia, Руководство пользователя

Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды