Toyota 2001 Sequoia Скачать руководство пользователя страница 145

Страница: 145 / 325

01_SEQUOIA_U (L/O 0009)

139

2001 SEQUOIA (OM34414U)

The A.D.D. can be engaged or disen-

gaged by the shifting operations des-

cribed in “(c) Shifting procedure”.

You should drive in four

−

wheel drive for

at least 16 km (10 miles) each month.

This will assure that the front drive com-
ponents are lubricated.

(c) Shifting procedure

SHIFTING BETWEEN “H” (2WD) MODE

AND  “H”  (4WD)  MODE
To  shift  from  “H”  (2WD)  mode  to  “H”
(4WD)  mode,

reduce your speed to less

than 100 km/h (62 mph) and push in the

“4WD” switch.
If the indicator light flashes when you

push  in  the  “4WD”  switch,  drive  straight
ahead  while  accelerating  or  decelerating.
If  the  indicator  light  flashes  and  the  buzz-

er sounds when you push in the “4WD”
switch, reduce your speed or stop the

vehicle.

CAUTION

Never push the “4WD” switch if
wheels are slipping. Stop the slipping

or spinning before shifting.

To shift from “H” (4WD) mode to “H”
(2WD) mode,

push the “4WD” switch

again  to  turn  it  off.
This  can  be  done  at  any  vehicle  speed.
If  the  indicator  light  flashes  when  you

push in the “4WD” switch, drive straight
ahead while accelerating or decelerating,

or drive in reverse.

SHIFTING BETWEEN “L4” (UNLOCKED)

AND  “L4”  (LOCKED)
To  shift  between  unlock  and  lock
modes  in  “L”,

move the transmission

shift  lever  and  front  drive  control  lever.
This  can  be  done  at  any  vehicle  speed.
If  the  indicator  light  flashes  when  you

move the front drive control lever, drive
straight ahead while accelerating or decel-

erating.

CAUTION

Never move the front drive control
lever if wheels are slipping. Stop the

slipping or spinning before shifting.

NOTICE

Do not drive on a dry paved surface
in “L4” (LOCKED) mode. This may

damage the locking mechanism and

the drive system.

(b) A.D.D. (automatic

disconnecting differential)

Содержание 2001 Sequoia






































































































































































































































































































































Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды

Toyota 2001 Sequoia, Руководство пользователя

Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды