Toyota 2001 Sequoia Скачать руководство пользователя страница 138

Страница: 138 / 325

01_SEQUOIA_U (L/O 0009)

132

2001 SEQUOIA (OM34414U)

“START”—Starter motor on. The key

will return to the “ON” position when
released.

For starting tips, see page 227 in Section
3.

“ON”—Engine on and all accessories

on.

This is the normal driving position.

“ACC”—Accessories such as the radio
operate, but the engine is off.

If you leave the key in the “ACC” or
“LOCK” position and open the driver’s

door, a buzzer will remind you to remove

the key.

“LOCK”—Engine is off and the steering

wheel is locked. The key can be re-

moved only at this position.

You must shift the selector lever into the

“P” position before turning the key from

“ACC” to the “LOCK” position.
Once you remove the key, the engine im-

mobiliser system is automatically set. (See
“Engine immobiliser system” on page 10

in Section 1

−

2.)

When starting the engine, the key may
seem stuck at the “LOCK” position. To

free it, first be sure the key is pushed all

the way in, and then rock the steering
wheel slightly while turning the key gently.

NOTICE

Do not leave the key in the “ON”
position if the engine is not running.

The battery will discharge and the

ignition could be damaged.

Ignition switch with steering

lock

Содержание 2001 Sequoia






































































































































































































































































































































Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды

Toyota 2001 Sequoia, Руководство пользователя

Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды