Toyota 2001 Sequoia Скачать руководство пользователя страница 196

Страница: 196 / 325

01_SEQUOIA_U (L/O 0009)

190

2001 SEQUOIA (OM34414U)

1. Outside temperature

The outside temperature display indi-

cates the outside air temperature.

The displayed value is updated every 1

second.
The displayed temperature ranges from

−

C (

−

F) up to 50

C (122

F).

If there is some abnormality in the con-

nection of the outside air temperature sen-

sor, “

−−

C” (“

−−

F”) will appear on the

display. If “

−−

C” (“

−−

F”) appears on the

display, contact your Toyota dealer.
There may be a case that “

−−

C” (“

−−

F”)

appears momentarily when the ignition is

quickly turned to “ON”. It is normal if it

goes out soon.

2. Average fuel consumption

(“AVG”)

Average fuel consumption is calculated

and displayed based on total driving
distance and total fuel consumption

with the engine running.

The  displayed  value  is  updated  every  1
seconds.
To  reset  the  calculations,  return  the  mode
to  “AVG”  and  push  and  hold  the  “MODE”

and “E/M” button simultaneously for 2 sec-

onds.

3. Instantaneous fuel consumption

(“INST”)

The instantaneous fuel consumption is
calculated and displayed based on dis-

tance and fuel consumption for 1 sec-

onds with the engine running.

The displayed value is updated every 1

seconds.
Note that an accurate figure may not be

shown in the following cases.

When the vehicle is stopped with the

engine running, the display will indicate

the extremely high fuel consumption.

When the vehicle is driving down a

long slope, applying the engine brake,

the display will indicate the extremely
low fuel consumption.

The calculation is reset when the ignition
switch is turned off.

4. Distance to empty

(“DTE”)

The distance the vehicle can travel with

the remaining fuel is calculated and
displayed based on the quantity of re-

maining fuel and past fuel consumption.

The displayed value is updated every 1

second.

Every time you refuel the vehicle, the cal-

culation  is  reset.
The  actual  driving  range  varies  with  driv-
ing  habits  and  road  conditions.  If  fuel  con-

sumption is good, the driving range will be

longer. If fuel consumption is poor, the
driving range will be shorter.

Содержание 2001 Sequoia






































































































































































































































































































































Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды

Toyota 2001 Sequoia, Руководство пользователя

Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды