Toyota 2001 Sequoia Скачать руководство пользователя страница 123

Страница: 123 / 325

01_SEQUOIA_U (L/O 0009)

117

2001 SEQUOIA (OM34414U)

Ignition switch light

For easy access to the ignition switch,

the ignition switch light comes on when
any of the side doors are opened.

The  light  remains  on  for  some  time  after
all  the  side  doors  are  closed.
However,  in  the  following  cases,  the  lights

go off immediately.

All the doors are closed when the igni-

tion key is in “ACC” or “ON” position.

The ignition key is turned to “ACC”,

“ON”, or “START” after all the side

doors are closed.

All the doors are closed and locked.

When all the doors are unlocked with a

key or wireless remote control transmitter

simultaneously, the ignition switch light
comes on for about 15 seconds and then

fade  out,  even  if  the  door  is  not  opened.
To  prevent  the  battery  being  discharged,
the  light  will  automatically  turn  off  when

the key is removed and the door is left

opened for 20 minutes or more.
The following adjustments can be made in

this system. For details, contact your
Toyota dealer.

Cancelling the door key or wireless re-

mote control transmitter linked opera-
tion

Changing the timing for the light turn-
ing off

Windshield wipers and washer

To turn on the windshield wipers, move

the lever to the desired setting.

The key must be in the “ON” position.

Lever position

Speed setting

Position 1

Intermittent

Position 2

Slow

Position 3

Fast

The “INT TIME” band lets you adjust the

wiping time interval when the wiper lever
is in the intermittent position (position 1).

Twist the band upward to increase the

time between sweeps, and downward to
decrease it.

Содержание 2001 Sequoia






































































































































































































































































































































Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды

Toyota 2001 Sequoia, Руководство пользователя

Результаты поиска

Содержание 2001 Sequoia

Отзывы:

Похожие инструкции для 2001 Sequoia

Бренды по названию

Популярные бренды