tousek
/ EN_ST-63_02 / 25. 03. 2020
- 33 -
Technical data
Traffic light control board STA 11 in plastic housing IP 54 (210 x 310 x 125mm)
Power supply
230Va.c., +6/-10%, 50Hz
Relay load Red/Green traffic light
230V, max. 60W
Article no.
12120370
Optional equipment
induction loop detector ISD 6 (2-channels) • pluggable receiver
General
•
To implement traffic light function the control unit STA 11 has to be connected with the operator control unit via bus system.
Valid for the traffic light mode:
• The inputs of the pulse buttons of the ST 63 have no function and the impulse emission is only possible
via traffic light board
page 35–37 (I-loops, pulse buttons, radio
)!
• When using a radio receiver in traffic light mode, the receiver is not to plugged into the slot
of the operator control unit, but into the slot of the traffic light control!!
5. Optional Traffic light control unit STA 11
STA 11
• Connection possibility of two impulse switches or induction loops for Green request and two Red/Green traffic lights 230V,
60W (inside and outside).
• Connection slots for optional radio receiver and induction loop detector
•
Only for control unit ST 63 in steel housing
•
(ST)
control board ST63
(A)
traffic light control STA 11
(B)
Bus terminals (88 / 89)
(K-A)
terminals of the traffic light
control board STA 11
ST
A
B
88 89
B
88 89
K-A
