tousek
/ EN_ST-63_02 / 25. 03. 2020
- 13 -
main layer
sub layer
settings/adjustments
buttons/switches
page 15
impulse button
OPEN/STOP/CLOSE
OPEN/CLOSE/OPEN
OPEN
DEADMAN
*) if impulse button is set on
DEADMAN, then all other buttons
also in DEADMAN mode-.
pedestr. opening
OPEN/STOP/CLOSE
OPEN/CLOSE/OPEN
OPEN
DEADMAN *)
ILD channel
(ILD = Induction loop detector)
impulse OPEN
security
attendence
(also in DEADMAN mode)
security
attendence
photocells
page 17
G
inner photocell
not active
during closing reverse
stop, opens after release
during opening stop-then open
G
outer photocell
not active
during closing reverse
stop, opens after release
G
back area photoc.
active
not active
ILD/PHC pause time
ILD/PHC = induction loop detektor / photocell
no influence of photocell/ ILD
cancel pause time (close immediately)
re-start pause time
immediate closing after opening
PHC-self test
(PHC = photocell)
active
not active
safety edge
page 20
G
safety edge LL1
LL = left leaf
not active
opening active
closing active
opening / closing
G
safety edge LL2
not active
opening active
closing active
opening / closing
G
safety edge RL1
RF = right leaf
not active
opening active
closing active
opening / closing
G
safety edge RL2
not active
opening active
closing active
opening / closing
SE- status display
Display: status safety edges (= SE)
left leaf
page 21
delay left leaf
opening delay
closing delay
delay time left leaf
OFF, 1...25s
= 2s
force
60...100%
= 70%
speed
60...100% (SWING X3 TPspeed)
= 100%
75...100% (SWING X4 LHTP)
only with
swing gates
soft speed
25...50%
= 50%
soft stop time OPEN
OFF, 0,1...9,0s
= 5s
soft stop time CLOSE
OFF, 0,1...9,0s
= 5s
right leaf
page 21
delay right leaf
opening delay
closing delay
delay time right leaf
OFF, 1...25s
= 2s
force
60...100%
= 70%
speed
60...100% (SWING X3 TPspeed)
= 100%
75...100% (SWING X4 LHTP)
only with
swing gates
soft speed
25...50%
= 50%
soft stop time OPEN
OFF, 0,1...9,0s
= 5s
soft stop time CLOSE
OFF, 0,1...9,0s
= 5s
operating mode
page 22
impulse logic
stop, start of pause time
impulse suppressioning when opening
pause time extension
G
operating mode
impulse mode
1...255s automatic close [ increment 1 ]
pedestr. opening
25...100%
= 100%
automatic mode
complete / pedestrian opening
only complete opening
only pedestrian opening
pause time logic
no influence
permanent ON
only with
folding gates
ramp time open
1,0...6,0s
= 3s
ramp time close
1,0...6,0s
= 3s
menu item showed:
with traffic mode,
without traffic mode,
with swing gates,
with folding gates
swing / folding gate control ST63
+
–
Menu structure
Adjustments - overview
ESC
ENTER
Note: Some changes in the functionality or operating logic are not accepted until the gate is closed and the word „Ready“ app
ears on the display
.