Total Gym ELEVATE ENCOMPASS, Руководство пользователя

Страница: 9 / 32

9
ELEVATE
®
ENCOMPASS
TM
OWNER’S GUIDE ELEVATE
®
ENCOMPASS
TM
OWNER’S GUIDE
27. When the fixed pin is inserted into the hole gently move the folding
platform to the right. Then lower the right side of the folding platform
down to align the right pull-pin into the plate on the right lower rail as
shown below. You may need to pull the right pull-pin.
Fixed pin
28. When both left and right pull-pins are engaged into the rails, rotate the
folding platform away from the glideboard until the lower pull-pin on the
left side pops into the rail hole. To fold the platform for storage, simply
disengage the lower left pull-pin and fold the platform (the squat stand
will be attached).
Lower
pull pin
TELESCOPING SQUAT STAND ATTACHMENT
29. Lift the release lever on the back of
the telescoping squat stand. Align
the squat stand receptacle posts
over the folding platform posts.
Slide the squat stand down and
align it with one of the three levels
indicated by the holes in the posts.
Release the lever to lock the squat
stand into place.
30.
Inspect the lever and pull up on the squat stand handle to insure the squat
stand is locked in on both sides.
INSTALLING THE HANDLES
31. Open the hardware box and
remove the handles and threaded
quick links as shown. Install them
on each end of the cable.
ALMOST FINISHED
32. When the assembly is finished, look for extra parts to ensure no
steps were missed. Inspect your Encompass for defects and contact
Customer Service if you feel you have any problems. Before using your
Encompass, read the safety and usage instructions in the Owner’s Guide.
YOUR ENCOMPASS IS NOW ASSEMBLED!
ASSEMBLY