15
ELEVATE
®
ENCOMPASS
TM
OWNER’S GUIDE
ELEVATE
®
ENCOMPASS
TM
OWNER’S GUIDE
FOLDING
6.
Stow the handles so they are not damaged when storing or moving your unit.
Loop the handle straps around the opposite LAT Bar pull pin as shown below.
7.
Grasp the upper rail where indicated (on the label inside each of the upper
rails) and lift it toward the tower. As you raise the rails, place one hand behind
the tower to prevent the tower from leaning back.
Grasp Here
8.
Push the glideboard and tower together until the unit stands vertical.
9.
Lift the rail fold latch located on the hinge crossbar and hook the rails to
the tower crosspin with the latch.
Rail Fold Latch
WARNING
Lift only where indicated on the upper rail. Lifting elsewhere may cause the
rails to move up the tower during the folding process. This will cause the
tower to lean backwards excessively. If this happens accidentally, straighten
and lower the rails back to the floor. Then start over. Or you can squeeze the
release handle on top of the tower and pull the tower forward.
Содержание ELEVATE ENCOMPASS
Страница 1: ...ELEVATE ENCOMPASS TM OWNER S GUIDE...