Total Gym ELEVATE ENCOMPASS, Руководство пользователя

Страница: 30 / 32

30
ELEVATE
®
ENCOMPASS
TM
OWNER’S GUIDE
MAINTENANCE & CARE
Your ELEVATE Encompass model will offer you or your facility and
your clientele years of easy operation if you follow these simple
tips for maintenance and care. With periodic cleaning, moving
parts and rolling surfaces will maintain their smooth function. Use
alcohol and a waterless cleaning solution on parts to keep your
ELEVATE Encompass looking its best and to prevent dust build-
up. Clean rail surfaces on a regular basis with a non-corrosive
cleaner like soap and water. Some black powder residue is normal,
especially on the bottom rails.
NOTE: Encompass incline trainers have some functional moving
parts that, by design, slide over painted parts and may eventually
wear off the paint (i.e., hinge lock on rails and pull pin on LAT
Bars). Normal frequent use will prevent corrosion in those areas.
Apply clear grease to these painted areas for extra protection in
high-humidity environments or for long-term storage.
CAUTION! DO NOT USE ANY LUBRICANTS OR SILICONE-BASED
PRODUCTS on the rails or wheels. This will cause the wheels to
slide rather than roll and will damage the wheels. You may use
lubricant on the folding hinges when needed. When lubricating
these parts, remove any residue of lubricant from the cables,
rails or wheel surfaces. Clean the glideboard material with a non
oil-based window cleaner. DO NOT USE ARMOR ALL
®
OR LIKE
SUBSTANCES. These will make the glideboard slippery. Wipe
down your ELEVATE Encompass with a clean cloth.
MAINTENANCE AND CARE
MAINTENANCE SCHEDULE
DAILY
1 . Wipe down all padded surfaces with antibacterial cleanser after each use.
2 . Move the glideboard up and down rails to ensure smooth rolling. If glideboard does not roll
smoothly, clean rails and wheels thoroughly.
WEEKLY
1 . Inspect all cables for wear or damage. Replace damaged cables.
2 . Wipe down rails with a non-corrosive cleanser.
3 . Clean all surface areas for aesthetics.
4 . Check all screws, fasteners and knobs to ensure they are installed correctly and tightened.
5 . Check for ease of use when changing levels. Report any difficulty in changing levels.
6 . Visually and functionally check all pulleys for smooth operation. Clean as needed.
7 . Check all pads, fabric or foam for wear and replace as needed.
a. Foot holder pads
b. Glideboard upholstery
c. Pulley handles
MONTHLY
1 . Remove glideboard for visual inspection of wheels. Clean any debris accumulated on the wheel
assembly.
2 . Inspect rubber stoppers.
3 . Visually inspect glideboard for tearing or punctures.
4 . Check all additional accessories for proper function and wear.
5 . Replace all parts that show signs of wear. Contact Customer Service in US at 858-586-6080 or
contact the approved distributor in your country.