Home Automation Interface
Security
270
Security
Through the Magnia SG20 Digital Central interface, you can view and change the
security settings of your security system. To view the current state of your security
system connected to your home automation controller, use a Web browser on a client
computer or PDA to access your Magnia SG20 Digital Central web site.
The security panel is accessed by clicking the
Security
link under Home Automation.
The Digital Central interface will tell you if your alarm system is Ready, Faulted, Armed
and Home or Armed and Away. This interface is designed to look and act very similar to
the actual security control panel.
Because the supported security systems may vary, please consult the manual that came
with your system. The interface provided on Digital Central acts as if a security panel was
being used (for example, clicking the number 1 on Digital Central will result in the same
action as if you pressed 1 on the actual security panel).
You will need your pass codes to turn off the alarm system. The codes you enter through
the Digital Central interface are secure (they are encrypted before they are sent to the
SG20 (via Secure Sockets Layer (SSL)) and then forwarded to the home controller. They
are not saved on either the client computer or PDA or the SG20.
❖
To arm your alarm system, click either the
Home
or
Away
button (just as you do with
the actual alarm panel).
❖
To disarm the alarm, type your pass code in the edit box, and click the
Disarm
button.
❖
To turn on or off the chime (door open/closed) click the
Chime
button.
Heat / Air Conditioning
The Magnia SG20 Digital Central interface allows you to control your heating and air
conditioning units that are controlled through a thermostat configured in your home
automation controller. To control thermostat settings, use a web browser on a client
computer or PDA to access your Magnia SG20 Digital Central web site.
