12
Introduction
Identification of controls (Continued)
Remote control
DVD MENU button
Use the MENU button to display the menu included on
many DVD video discs. To operate a menu, follow the
instructions in “DVD Menu.”
#"
The instructions in this manual describe the functions on the remote control. See the page in
for details.
*TV control buttons
The various brands of TV listed on page 14 can be operated
with this remote control. There may be some TV models that
cannot be operated with this remote control. If this is the case,
use the original remote control supplied with the TV.
•CABLE BOX control buttons
The various brands of CABLE BOX listed on page 15 can
be operated with this remote control. There may be some
CABLE BOX models that cannot be operated with this
remote control. If this is the case, use the original remote
control supplied with the CABLE BOX.
FWD
USB
DVD
DVD/VCR button 13
* TV button 14
14
CALL button
* DISPLAY button
11
11
ZERO RETURN button
JUMP button
37
50
CM SKIP button
ZOOM button
36
50
CANCEL button
CLEAR button
31
50
VCR MENU button
SETUP button
28
63
COUNTER RESET button 37
59
54
ATR button
SUBTITLE button
36
56
SP/SLP button
PLAYMODE button
39
52
DVD/USB button
A-B RPT button
58
52
49
38
TOP MENU button
59
54
PLAY button
47
35
PAUSE/STILL button
48
36
REV button
49
35
13
28
13
Direction buttons
SET+/- buttons
CH+/- buttons
/
/
/
(
)
* POWER button 13
* 100 button 14
* VOL +/- buttons 14
* INPUT SELECT button 14
PROGRAM button 14
RETURN button 63 70
STOP button
47
35
HDMI button 22
DVD/VCR SELECT button 27
47
TV/VCR button 27
REC/OTR button 39
TIMER REC button 42
41
SLOW button
49
36
CLOCK/COUNTER button 38
FWD button
49
SKIP button
VISS + button
49
38
AUDIO SELECT button
AUDIO button
44
55
35
DVD MENU button 54 59
* ENTER button 28 63
SKIP button
CABLE BOX button 15
* Direct channel selection
buttons (0-9)
Number buttons (0-9)
13
14
* CH / button
VISS - button
51
MARKER button
34
EJECT button (VCR)
47
OPEN/CLOSE (DVD)
ANGLE button
13
Introduction
Operation
• Aim the remote control at the remote sensor and press control buttons to
operate.
• Operate the remote control within 30
°
angle on either side of the remote
sensor, up to a distance of approx. 7 meters.
Replace the compartment
cover.
Install two “AAA” batteries
(supplied), paying attention to the
polarity diagram in the battery
compartment.
Open the battery compart-
ment cover in the direction of
the arrow.
Approx. 7 meters
Caution:
Never throw batteries into a fire.
Notes:
• Be sure to use AAA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with
applicable laws and regulations.
• If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with
new ones.
• When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix
battery types or use new and used batteries in combination.
• Always remove batteries from remote control if they are dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid from leaking into the battery compartment.
• Press DVD/VCR to operate the DVD/VCR.
• Press POWER to turn the DVD/VCR on or off.
• Select your desired operating mode (DVD or VCR) using DVD/VCR SELECT.
(DVD or VCR indicator on the front panel will show you which mode is selected.)
• Press CH + or CH – to move through the channels one channel at a time.
• The
/
/
/
are also used to navigate on-screen menu system.
• You can directly access specific channels using Direct channel selection buttons (0–9).
• Each press of DVD/VCR SELECT on the remote control, switches the screen between the VCR screen (VCR mode)
and the DVD screen (DVD mode).
1
2
3
Remote control basics
Inserting batteries
14
Introduction
Multi brand remote control
This remote control can be compatible with various brands of TV/
Cable box/DSS
®
satellite receiver by setting their control codes. The
TOSHIBA code has initially been set to control TOSHIBA TVs.
Setting TV control codes
Table of TV brand codes
Brand name
Brand Code
of your TV
Toshiba
01
Bell & Howell
09
Carver
10
Celebrity
03
Citizen
12
Curtis Mathes 09, 12
Dumont
14
Electro band
03
Emerson
09,11
Fisher
09
GE
02, 07, 11
Gibralter
14
Goldstar
11
Hallmark
11
Hitachi
06
Infinity
10
JBL
10
JCB
03
JVC
05
LXI
01, 02, 09, 10, 11
Magnavox
10
Marantz
10
Megatron
06, 11
Memorex
04, 09, 11
MGA
04, 11
Midland
02,07, 14
Mitsubishi
04, 11
Motorola
08
MTC
12
NAD
01, 11
Nikko
11
Optimus
09
Optonica
08
Panasonic
07, 10, 15
Press TV to set the remote control operating
your TV.
1
2
Important
Some TV’s may not respond to all the operations above,
or may not be operated at all with this remote control. In
this case, operate your TV with its own remote control.
Notes:
• For some brands, several control codes (brand codes) are al-
located. Try each of them until the buttons work on your TV.
• If you replace the remote control’s batteries, set the brand code
again.
While holding down PROGRAM, enter the two
digits of your TV's brand code (listed on the
right) using Number buttons (0–9), then release
PROGRAM.
Point the remote control at your TV and use each button
listed below to make sure that your TV is operated
correctly.
POWER
To turn the TV on or off.
CH
M
M
M
M
M
/
?
?
?
?
?
To select TV channels in the upper
or lower direction.
VOL +/–
To adjust the sound level.
INPUT SELECT
To select an external source such
as a VCR.
To select TV channels. When select-
ing channels 1 to 9, first enter 0 and
then desired number.
100
To substitute for 100 channel key.
DISPLAY
To turn TV’s screen display on or
off.
ENTER
To use for the TV’s ENTER key.
Direct channel
selection buttons
(0-9)
Brand name
Brand Code
of your TV
Penney
01, 02, 07, 11, 12
Philco
10
Philips
10
Pioneer
16
Princeclub
12
Prism
07
Proscan
02
Proton
11
Pulser
14
Quasar
07, 15
Radio Shack
13
RCA
02
Realistic
09, 11, 13
Runco(NEC)
14
Samsung
11, 12
Sanyo
09
Scotch
11
Scott
11
Sears
01, 02, 09, 10, 11
Sharp
08, 13
Sony
03
Soundesign
11
Supreme
03
Sylvania
10
Tandy
08
Technics
07, 15
Techwood
07
Teknika
04,10,12
TMK
11
Victor
05
Vidikron
10
Vidtech
11
Wards
10, 11,13
Zenith
14
ENTER
PROGRAM
POWER
CH
M
M
M
M
M
/
?
?
?
?
?
0–9
TV
100
INPUT SELECT
VOL +/–
DISPLAY
15
Intr
oduction
Table of Cable box brand codes
Setting Cable box/DSS
®
satellite
receiver control codes
Press CABLE BOX to set the remote control
operating your Cable box/DSS
®
satellite receiver.
1
2
Important
Some Cable box/DSS
®
satellite receiver may not respond
to all the operations above, or may not be operated at all
with this remote control. In this case, operate them with
its own remote control.
Notes:
• For some brands, several control codes (brand codes) are al-
located. Try each of them until the buttons work on your
Cable
box/DSS
®
satellite receiver.
• If you replace the remote control’s batteries, set the brand code
again.
While holding down PROGRAM, enter the two
digits of your Cable box/DSS
®
satellite receiver
brand code (listed on the right) using Number
buttons (0–9), then release PROGRAM.
Point the remote control at your Cable box/DSS
®
satellite receiver and use each button listed below to
make sure that your Cable box/DSS
®
satellite receiver
is operated correctly.
POWER
To turn the Cable box/DSS
®
satel-
lite receiver on or off.
CH
M
M
M
M
M
/
?
?
?
?
?
To select cable/satellite channels in
the upper or lower direction. (Not
applicable to some brands of cable
box/satellite receiver.)
Number buttons (0–9) To select desired channels to record.
ENTER
To use for the Cable box’s ENTER key.
(Some cable boxes require you to use 100 button as the
enter button.)
Brand name of
Brand Code
your cable box
Toshiba
36
Anvision
13, 20, 21,
22, 23, 24,
25, 26, 58,
62, 84
Archer
1,
20, 21,
29, 42, 44,
63, 88, 91
Cablestar
13, 20, 21,
22, 23, 24,
25, 26, 58,
62, 84
Cableview
30, 42, 44,
52, 63, 88
Citizen
30, 42, 44,
52, 63, 88
Curtis
8, 9, 56, 61
Diamond
1,
20, 21,
29, 42, 44,
63, 88, 91
Eagle
13, 20, 21,
22, 23, 24,
25, 26, 58,
62, 84
Eastern
26, 28
GC Brand
30, 42, 44,
52, 63, 88
Gemini
4,
30, 85
General
1,
2,
3,
4,
31, 34,
55, 83, 85,
91
Hamlin
14, 15, 28,
41
Hitachi
31, 79, 80
Jerrold
1,
2,
3,
4,
31, 34,
55, 85, 91
Macom
31, 79, 80
Magnavox
13, 20, 21,
22, 23, 24,
25, 26, 58,
62, 84
Movietime
29, 32, 38,
39, 42, 44,
88
NSC
29, 32, 38,
39, 42, 44,
88
OAK
10, 11, 12,
13, 46
OAK Sigma
10, 11, 12,
13, 46
Panasonic
6, 8, 16, 17
Brand name of
Brand Code
your cable box
Philips
4,
13, 20,
21, 22, 23,
24, 25, 26,
58, 62, 84
Pioneer
5,
6,
78
Pulsar
30, 42, 44,
52, 63, 88
Randtek
13, 20, 21,
22, 23, 24,
25, 26, 58,
62, 84
RCA
6, 8, 16, 17
Realistic
44, 88
Regal
14, 23, 41,
84
Regency
26, 28
Rembrandt
29, 32, 38,
39, 42, 44,
88
Samsung
4,
6,
32,
42, 78
Scientific Atlanta
8, 9, 56, 61
Sheritech
27
SL Mark
4,
6,
32,
42, 78
Sprucher
6, 8, 16, 17
Stargate
4, 6, 30, 32,
42, 44, 52,
63, 78, 88
Sylvania
19
Teknika
74
Telecaption
77
Teleview
4,
6,
32,
42, 78
Texscan
18, 19
Tocom
1,
33, 34,
42, 48, 49,
73, 91
Unica
1,
20, 21,
29, 42, 44,
63, 88, 91
Universal
29, 42, 43,
44, 52, 63,
82, 88
Videoway
7,
23, 45,
50, 84
Viewstar
13, 20, 21,
22, 23, 24,
25, 26, 58,
62, 84
Warner Amex
6
Zenith
7,
23, 45,
50, 84
Instrument
Brand name
Brand code
Toshiba
99
RCA
98
Sony
97
Magnavox
95, 96
Brand name
Brand code
Draker
94
Primestar
93
Hitachi
92, 89
Panasonic
90
Table of DSS
®
satellite receiver brand codes