Toshiba SD-V594SC Скачать руководство пользователя страница 20

Страница: 20 / 134

Function setup (DVD)

Customizing the function settings (Continued)

DRC

: Off

QSound

: On

Menu

: English

Subtitle

: English

Audio

: English

E.B.L.

: Off

TV Screen

: 4:3

Display: On

Picture Mode

: Auto

JPEG Interval

: 5 Seconds

Screen Saver

: On

Parental

: Off

Password

: Change

HD Jpeg

: Off

Output

: Interlace

DivX(R) VOD

: Display

Parental control setting

Some discs are specified not suitable for children.
Such discs can be limited not to play back with the
unit.

1) Press

to select “Parental”, then press

ENTER. “Enter Password” screen will appear.

2) Press “0000” using Number buttons (0–9).

(Please note, this is pre-setting password of this
unit). Then press ENTER. The parental level list will
appear.
•

Level Off: The parental control setting does not

function.

•

Level 8:

Virtually all DVD software can be
played back.

•

Level 1:

DVD software for adults cannot be
played back.

3) Press

to select from the level 1 to level 8.

The limitation will be more severe as the level
number is lower. Then press ENTER.

4) Press OPEN/CLOSE to activate Parental control

setting.

Notes:
• Depending on the discs, the unit cannot limit

playback.

• Some discs may not be encoded with specific rating

level information though its disc jacket says “adult.” For
those discs, the age restriction will not work.

• The password is required every time when you change

the parental level.

• If you input a wrong number, press CLEAR.

Set the new password

1) Press

to select “Password”, then press

ENTER. “Enter Current Password” screen will
appear.

2) Press Number buttons (0–9) to input the current

password (If the password has not been set yet
after you purchase this unit, it is “0000”).

3) Then press ENTER. “Enter New Password” screen

will appear. Press Number buttons (0–9) to input
the new password.

4) Press ENTER. Now your new password has been

set. Be sure to remember this number!

If you forget the password...

1) Press OPEN/CLOSE to open the disc tray.
2) Remove the disc.
3) Press OPEN/CLOSE again to close the disc tray.

“No Disc” appears on the screen.

4) While holding 7 down on the remote control and

at the same time press STOP on the front panel.
“Password Clear” appears on the screen. Now the
password has been returned to the initial value
(“0000”).

HD Jpeg

This DVD/VCR equipped with a “HD Jpeg”. It can display
the HD resolution JPEG images when the DVD/VCR is
connected to a HDTV using HDMI.

On:
Select when you connect the DVD video player to
a HDTV via HDMI OUT jack. JPEG images is dis-
played in suitable picture quality (480p, 720p or
1080i)

Off:
The picture processing quality is fixed to 480p.

Notes:
• When the DVD/VCR is not connected to a TV using

HDMI, you cannot select “On”.

• When HD Jpeg is set to “On”, zoom function is prohibited

and component video outputs disabled when 480p, 720p
or 1080i is selected.

Setting details

Function

setup

VD)

Output

You can select the video output signal of the DVD
video player to the TV from “Interlace” or “Progres-
sive”.

Interlace:
Select when connecting to a composite TV or
a TV equipped with component video inputs
but progressive scan is not compatible.
Progressive:
Select when connecting to a TV equipped
with component video inputs and progressive
scan compatible.

Warning:
Once “Progressive” is selected when connecting to a
TV progressive scan incompatible, no image will be
seen on the video display.
In this case, you must reset the unit by pressing STOP
on the front panel for five seconds. The video output
will be restored to “Interlace” setting, and a picture will
once again be seen on a conventional analog display.

Notes:
• Some discs may not be played back with the progressive

scanning mode correctly because of the disc characteris-
tics or recording condition.

• Once Progressive scan on, S-video output is disabled.

Note:

If each setup (pages

) has been completed, the unit

can always be worked under the same conditions (espe-
cially with DVD discs).
Each setup will be retained in the memory even if you turn
the power off.

DivX

VOD

In order to play DivX

VOD (Video On Demand)

content on this unit, you first need to register the unit
with your DivX

VOD content provider. You do this by

generating a DivX

VOD registration code, which you

submit to your provider.

Press

to select “DivX(R) VOD”. Then press

ENTER. Your 8-character registration code is
displayed. Make a note of the code as you will need
it when you register with a DivX

VOD provider.

Then press ENTER to select Done.

Function setup (DVD)

Temporary disabling of rating level by DVD disc

Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
It is up to you to decide whether to cancel the rating level or not.

Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit

Note:
This temporary cancellation of rating level will be kept until the
disc is ejected.
When the disc is ejected, the original rating level will be set again
automatically.

ENTER

PLAY

0–9

OPEN/CLOSE

If the DVD disc has been designed to tempo-
rarily cancel the Rating level, the screen which
follows the “Reading” screen will change,
depending on which disc is played. If you
select “YES” with the ENTER key, password
input screen will then appear.

Enter the password with Number buttons (0–9).
Then press ENTER.

Function setup (DVD)

To exit from the entry, press
RETURN.

RETURN

Temporary disabling of rating level by DVD disc

Playback will commence if the entered
password was correct.

DVD

Other

Language code list

Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio”

Abkhazian

1112