1
0
. DETACHMENTS
No.
1
Part name
Grille air inlet
Procedure
Remarks
2
Electric parts
cover
CAUTION
Be sure to put on the gloves and long-sleeved
shirt at disassembling work; otherwise an
injury will be caused by a part, etc.
1.
Detachment
2
)
3
)
4
)
2.
Attachment
1)
Attach the air intake grille by reversing the
procedure of
its removal.
2)
Be sure to attach the safety strap
to grille air inlet.
2
1
1
Grille air inlet
Hook lock grille
Hook lock grille
Loosen screw
(Fig. 1)
Hinges
Hinges
Air inlet grille hook hole
Safety strap hook
(Fig. 2)
1.
Detachment
1)
Carry out work of item 1 of
①
2)
Remove the fixing screws of the terminal cover
and take off.
3)
Remove the
fixing
screw of the elec
tric
parts
cover, and detach the
electric parts
cover
by
slide.(The e
lectric parts
cover is clamped onto
the
hinge.) (Fig. 3)
2.
Attachment
1)
Attach the
electric parts
cover by slide
.
2)
Tighten the fixing screw for fix electric parts cover.
3)
Attach the terminal cover and tighten the fixing
screws of the terminal cover.
1)
Stop operation of the air conditioner and then
turn off switch of the breaker.
Loosen the screw on hook lock grille both side.
Slide the hook lock grille on
grille air inlet
in the
direction of arrow 1. (Fig. 1)
Push the center hook of
grille air inlet
in the
direction of arrow 2.
a
nd open the grille. (Fig. 1)
Release the safety strap hook from the
grille air
inlet
.
Remove the hinges on the air inlet grille from the
ceiling panel by pull until the end to right or left
side and push off hinges and then pull to
opposite
side air inlet grille will be release. (Fig. 2)
•
Do not remove the safety strap screw on the
ceiling panel side
.
5
)
6)
(Fig. 3)
CAUTION
Make sure insert the terminal cover on the
top of hanger.
Electric parts cover
Fixing screw
Terminal cover
Fixing screw
S
crew
Terminal cover
Hanger
- 97 -
